Skip to main content

Do You Have It? GUTS!

This is Kerry - I've decided to take over Steph's blog for a post and talk to you about something near and dear to my heart.  No, I'm not talking about Stephanie - I'm talking about good old classic Nickelodeon television.   If you were born in the mid 80s, you were a kid of the 90s and know exactly what I'm talking about.

Growing up, I religiously watched Nickelodeon Guts.  For those who don't know what Guts is - it is American Gladiators for kids…except with Ghostbuster Mike O'Malley hosting, and "Mo" refereeing.  Kids would compete in various events with the finale being the Aggro CragMega Crag, Super Aggro Crag (ok they seriously renamed it enough times).  The Aggro Crag wasn't just any ol' event - it was a treacherous mountain climb (28 feet) with rock avalanches (foam boulders), nuclear flying crystals (glitter), and strobe lights.  The winner of the game got a piece of the "radical rock" and hoisted it above their head in victory knowing they just did something that every 9 year old wanted to do. Come on, who isn't excited?

Several months ago, we hosted a 90s party complete with dressing up in our 90s gear that we dug out from the thrift shop…or had been holding on to since 1998.  We also decked out the house with 90s gear, food, and brought out a Nintendo 64 in full standard definition.  More importantly, we created a DIY, homemade Aggro Crag!

You can buy (or make) foam ones on ebay and other places, but where is the fun in that?  At first, I wanted to go super realistic and cast it in resin.  It didn't get past the WAF - wife approval factor - so I had to come up with plan B.  Plan B consisted of some cheap plastic materials, wood, some cement glue, some lights and an array of tools.  So if you are looking to make your own Aggro Crag, here is how we did it and this is what it looked like at night:

Materials
Tools
  • Saw and Dremel if you have one)
  • Exacto/Utility Knife
  • Screwdriver
First thing was to get the right design for the Crag.  Having studied the Crag in my youth my entire life (thank you Nick GAS), this wasn't too hard to do.  Stephanie freehand drew the design on some extra paper we had lying around and then cut it out.  It looked pretty good. The tall end was about 20.5 inches and the small end was about 8.25 inches.  The base was 20.5 inches.


We then traced the design onto the lighting panels using a sharpie.  The panels have 2 sides - one was smooth and the other had cracked texture.  We traced the first one so the cracked texture would be facing out.  So after we traced the first one, we traced it again on another panel.  Don't forget though, if you want the cracked texture on the outside for both sides (I recommend), you'll need to flip over the crag template or flip over the panel.  So now that we've got the patterns, it was time to cut out the Crag.


This was where it got a little bit ugly.  Polystyrene isn't the easiest to work with - it is prone to cracking - and our trip to Lowes didn't prove fruitful in finding some other type of plastic that was both rigid, cuttable, and had a neat texture to it. There were a couple options for cutting the light panels - either a saw or using a utility knife and scoring.  We went with option 2 and scored the plastic along our pattern (useful to use a straight edge to help guide you).  Once scored, you need to carefully split it.  If you put too much pressure, you will probably crack the plastic.  So keep scoring until it comes off fairly easily.  Be patient.  


After the two main side pieces, we cut out the 7 top and side pieces to connect the two main pieces together to create the true 3D look.  Some of this was trial and error to get the pieces to fit - luckily the pieces flexed a little bit.  You can see the pieces in the picture below (obviously taken after the Crag was complete).


So now that the plastic was cut, and the sharpie marks removed with the nail polish remover, we needed a base - we made it 22 inches x 6 inches and used wood to give it some weight.  We cut the wood and screwed all the pieces together.  Worried that the plastic wouldn't be stable enough, I used a Dremel to make some grooves in the wood (a saw would probably work too) that the plastic would sit in.  After putting some wood glue over the screws and sanding, we painted the wood black and stuck a GUTS label on it.


At this point, you could just cement or hot glue the pieces together and place it on the base and call it quits.  But I was going for the full on effect.  With the 9 feet of EL wire I bought, the Crag would certainly have a "WOW" factor.  We couldn't find any good glow in the dark spray paint, so we went with the EL Wire (see below).  It actually ended up looking fine without the paint. 


To put the finishing touches, we taped the EL wire to the inside of the Crag and velcroed the EL wire battery pack/switch to the inside of the base.



So this is what the finished product looked like: in the daylight and at night.  Pretty rad, dude!


Will it stand the test of time?  Doubtful.  But at least for a day, I can hoist a piece of the glowing radical rock and fulfill my childhood dream.

Do you have it? GUTS!

Quick update: The Aggro Crag has stood the test of time and a move! It is still delicate but the lights still work. I've occasionally brought it out for events and it this would make the perfect halloween accessory!

Kerry

Comments

  1. Approximately how much did you spend in supplies?

    ReplyDelete
    Replies
    1. i just made one it cost me around $30

      Delete
    2. That's awesome !! I don't remember, but I don't think that it cost too much because we had the wood and paint. We just had to purchase the lights and the plastic. How did yours turn out?

      Delete
    3. Would you consider selling the aggro crag trophy that you made? I'm interested purchasing it if you are

      Delete
    4. Hi Jennifer ! I'm flattered that you want to buy it, but ours isn't for sale..sorry !

      Delete
  2. Replies
    1. Hi Thomas,

      Are you being serious? Thanks ! I'm not sure...I'll have to ask my husband. I don't know if it would make it through the shipping, though.

      Delete
  3. This comment has been removed by a blog administrator.

    ReplyDelete
  4. Trying to follow this but can't seem to find the plastic you are describing anywhere

    ReplyDelete
    Replies
    1. It is a type of plastic used to cover flourescent ceiling lights. I believe we found it at Lowe's. Hope this helps !

      Delete
  5. I built one as well that looks amazing. I did 2-9ft pieces of el wire to make it glow even more! If you want to check it out, it’s in my IG: @trevorconsavage1. I suppose it could be for sale.

    ReplyDelete
    Replies
    1. I wish I could post the photos of it here

      Delete
    2. It looks great !!! Much glow-ier than ours! Nice !!

      Delete

Post a Comment

Popular posts from this blog

A Tisket. A Tasket. A Wall Full of Baskets

Soo...after my new found obsession with Pinterest started, I came across this wonderful idea for small bathroom storage . Our upstairs "guest" bathroom doesn't have a lot of storage space, our sink is narrow with little cabinet space, and I'm not very in to the shelf/cabinet over the toilet idea.  So I was thrilled when I saw this picture.  I love baskets because they are a versatile way to store anything and they look good doing it.  I was also excited because the current towel bar over the toilet was not centered, which really bothered me, so now I had an excuse to take it down.   For the project: Tools Needed: Screw Driver Drill Putty knife (if needed) Paint roller (if needed) Paint tray (if needed) Level Measuring tape Pencil Materials Needed:   Towel Bars Baskets Something to attach baskets to bar - I used craft ribbon Spackling (if needed) Sand paper (if needed) Self-adhesive drywall joint tape (if needed) Primer and P

Fallin' For Tulle Wreaths

Pinterest is at it again.  While browsing Pinterest during my daily hourly look through, I found this pretty fall wreath : Since it is on Etsy, I started to look for an online tutorial on how to make a tulle wreath.  I've never seen one before, so I wasn't sure where to start.  Google makes searching for things so easy and I quickly found this  tutorial.  It was very helpful. I got most of my materials at a store called WOW Outlets in Pennsylvania while visiting my family (yes, another trip to PA).  The foam ring is 11" .  I originally started with a 12" ring, but felt it was too big.  I had almost the whole wreath covered with tulle, didn't like it, and took it apart for the smaller ring. I got some of the tulle at the same store, some at the $1.00 section in JoAnn's, and had some cut from a bolt at JoAnn's.  I also purchased some gold ribbon as well. The flower, leaves, and scarecrow are all from fall decorations I had lying around the ho

Spring Hanging Towels

I just wanted to share what I started over Easter break and finished yesterday in between church, hunting for Easter baskets, and eating tons of food.  My Gram's birthday and my godmother's birthday is in April, so I told them I'd make an Easter hanging towel for them.  I had four towels, so I was able to make 8 all together.  Only five are shown: Since I last made the shamrock one, I did find out that I can make a buttonhole with my sewing machine.  However, I can't find the manual so I still don't know how to use it.  So I'm still sewing snaps on the towels like I did  here .  I did figure out that I can sew the button on at the same time as the snap, so that made it MUCH easier than the first time I did it.  I actually like the snaps and will probably keep with it even if when I do figure out how to use it. I gave all of them away as gifts, except for one.  I think they turned out just springy :) I hope that you all had a blessed Easter !