Skip to main content

Tool Wall !

My first project post is about our tool wall.  Organization makes life so much easier!

After painting our laundry/storage room, my first need was to organize the tools.  Previously, we had all our tools thrown into a big tub.  Every time I needed something, I had to rummage through the tub and pull almost everything out in order to get the tool I needed. So, a pegboard tool wall was the solution.  


I got 2, 2x4 foot pegboards.  I first walked out of Lowe's with a 4x4 pegboard, but it would not fit in my car.  So I walked right back in, returned, and got 2 smaller ones. I also got 6, 1x2x4 boards (pine, oak, poplar will work). 


To hang the tools, I bought a 43 piece pegboard organizer and some extra pegboard hooks. 
After using a stud finder to locate the studs in the wall, I drilled 2 inch drywall screws through the boards, into the walls. I had to build a frame first, otherwise the pegboard would be right up against the wall and I would not be able to put the pegs in the holes.  The two vertical boards shown are where the studs are located. 
I used the same drywall drills to attach the pegboard to the frame.  
After I took this photo, I added the last board to the frame (on the far left).
I added the pegboard hooks, and voi-la - Organized tools!
Finished product with all the tools on the pegboard.  For my blog, most of the tools you will need can be found right here.


Steelers rug not included.















So this is my first project post.  I completed this project on June 22, 2011.  It was actually pretty quick and easy.  Since this project was done pre-blog, I was not yet taking REAL step-by-step photos, nor keeping track of material names.  I will promise to do better as the blog goes on.

How do you organize your tools?  A nice tool chest? Pegboard? Tub?

Now you can Do It Yourself Too !

~Stephanie

Comments

  1. Your tool wall looks great! It’s definitely a good idea to get all your tools sorted and organized. It makes finding them easier and is also a lot safer for everyone at home. I used to keep my tools in a chest, but they were usually packed in helter-skelter. I ended up building a tool cabinet with drawers to make sure everything is sorted out.

    ReplyDelete
  2. What an efficient tool board. Now, everything’s clean and organized! As for me, I keep my tools in pegboards. My sister used to call it “the pegboard book of tools” because that set of pegboard literally looks like a huge book. :D

    ReplyDelete
    Replies
    1. We really like the pegboard too - much better than digging through a tub full of tools. We've even added some more tools since last January…with a pegboard, adding new tools is super easy and everything has a place.

      Delete

Post a Comment

Popular posts from this blog

A Tisket. A Tasket. A Wall Full of Baskets

Soo...after my new found obsession with Pinterest started, I came across this wonderful idea for small bathroom storage . Our upstairs "guest" bathroom doesn't have a lot of storage space, our sink is narrow with little cabinet space, and I'm not very in to the shelf/cabinet over the toilet idea.  So I was thrilled when I saw this picture.  I love baskets because they are a versatile way to store anything and they look good doing it.  I was also excited because the current towel bar over the toilet was not centered, which really bothered me, so now I had an excuse to take it down.   For the project: Tools Needed: Screw Driver Drill Putty knife (if needed) Paint roller (if needed) Paint tray (if needed) Level Measuring tape Pencil Materials Needed:   Towel Bars Baskets Something to attach baskets to bar - I used craft ribbon Spackling (if needed) Sand paper (if needed) Self-adhesive drywall joint tape (if needed) Primer and P

Fallin' For Tulle Wreaths

Pinterest is at it again.  While browsing Pinterest during my daily hourly look through, I found this pretty fall wreath : Since it is on Etsy, I started to look for an online tutorial on how to make a tulle wreath.  I've never seen one before, so I wasn't sure where to start.  Google makes searching for things so easy and I quickly found this  tutorial.  It was very helpful. I got most of my materials at a store called WOW Outlets in Pennsylvania while visiting my family (yes, another trip to PA).  The foam ring is 11" .  I originally started with a 12" ring, but felt it was too big.  I had almost the whole wreath covered with tulle, didn't like it, and took it apart for the smaller ring. I got some of the tulle at the same store, some at the $1.00 section in JoAnn's, and had some cut from a bolt at JoAnn's.  I also purchased some gold ribbon as well. The flower, leaves, and scarecrow are all from fall decorations I had lying around the ho

Spring Hanging Towels

I just wanted to share what I started over Easter break and finished yesterday in between church, hunting for Easter baskets, and eating tons of food.  My Gram's birthday and my godmother's birthday is in April, so I told them I'd make an Easter hanging towel for them.  I had four towels, so I was able to make 8 all together.  Only five are shown: Since I last made the shamrock one, I did find out that I can make a buttonhole with my sewing machine.  However, I can't find the manual so I still don't know how to use it.  So I'm still sewing snaps on the towels like I did  here .  I did figure out that I can sew the button on at the same time as the snap, so that made it MUCH easier than the first time I did it.  I actually like the snaps and will probably keep with it even if when I do figure out how to use it. I gave all of them away as gifts, except for one.  I think they turned out just springy :) I hope that you all had a blessed Easter !