Skip to main content

Handling in the Towel

For my birthday and Christmas, my mom will sometimes buy me cute hand towels for the kitchen.  Every once in a while she'll pick up a holiday-themed one with a homemade handle from a craft fair.  I like these ones because they button/snap/velcro and will stay hooked to a handle and won't drop to the floor.  My cousin's wife pinned this cute idea on Pinterest which was linked to this pattern.  I printed out this pattern and went to work on my first handle for a towel.  

The instructions were pretty easy to follow, but I made (and will make) a few changes to it as I went (go) along.  The hardest part for me was doing the button hole.  I don't have a button setting on my sewing machine, so I did the best I could.  I think next time I'll hand sew a snap button, or just stitch some velcro on both sides.  I will also make the "handle" part of the pattern a little bit wider.  Here it goes:

Tools:
  • Sewing machine (unless you're real good at sewing)
  • Measuring tape
  • Scissors
  • Seam ripper (for mistakes - I had lots of- I'm still learning to use my machine)
Materials:
  • Hand towel (fold in half and cut down the middle to make 2 hanging towels)
  • Fabric for your hanging part (6 separate pieces of 7" by 12" fabric)
  • Thread
  • 2 Buttons (or snaps or velcro)
  • Pattern
  • Card stock or paper to trace the pattern on to

I can't take credit for the pattern or the steps, so I'll just briefly share what I did.  I started to put up our St. Patrick's Day decorations when I came across this towel.  I figured it would be a good time to try out the pattern, so I cut the towel in half and found some old fabric lying around in my fabric box.


After I traced and cut, I had to layer 3 of the pieces.  The first piece goes right-side up, the other two are right-side down.  They are layered this way because you will sew them, then flip it right-side out.  


Make sure to pin the pieces together so that they stay in place as you sew.  Sew a 1/4 inch hem around all sides - just not the bottom.


Then I tucked the towel into the bottom.  First, I sewed the towel/handle about 1 inch from the bottom of the handle.  Then I put a little less than 1/4 inch hem around the sides.  Then I added a final 1/4 inch hem at the bottom of the handle just to be secure.


Now, putting the hems was hard for me because the towel + handle was very thick.  I had to rip out many hems because the thread kept gathering underneath the backside of the towel.  I finally changed the setting for the one hem.  If you notice, there are two different hems when sewing the towel to the hanger.

Then, the button hole came.  I folded the loop part down to see where the button would go. Then I cut a slit. Around the slit, I tried to sew it together.  It's not pretty, but it works.  Like I said earlier, I might just sew a snap button on the next time I make one.


I'm extremely happy and proud of the final product.  I've already lined my mom up for the other half of the towel.  

How do you hang up your towels? Stuff them in the drawers? On the drawer pulls? Oven?

Now you can Do It Yourself Too !

~Stephanie

Comments

  1. Where did you get the over the drawer towel holder?

    ReplyDelete
    Replies
    1. I got it at Bed Bath and Beyond: http://www.bedbathandbeyond.com/1/1/20752-forma-over-the-cabinet-double-towel-bar.html

      Later, I ended up getting a single bar'd one because the double one just got in the way.

      ~Stephanie

      Delete
  2. how to find pattern for the top of towel?

    ReplyDelete
    Replies
    1. From this website : http://kleiosbelly.files.wordpress.com/2010/01/hanging-dishtowel-pattern2.pdf

      Delete

Post a Comment

Popular posts from this blog

A Tisket. A Tasket. A Wall Full of Baskets

Soo...after my new found obsession with Pinterest started, I came across this wonderful idea for small bathroom storage . Our upstairs "guest" bathroom doesn't have a lot of storage space, our sink is narrow with little cabinet space, and I'm not very in to the shelf/cabinet over the toilet idea.  So I was thrilled when I saw this picture.  I love baskets because they are a versatile way to store anything and they look good doing it.  I was also excited because the current towel bar over the toilet was not centered, which really bothered me, so now I had an excuse to take it down.   For the project: Tools Needed: Screw Driver Drill Putty knife (if needed) Paint roller (if needed) Paint tray (if needed) Level Measuring tape Pencil Materials Needed:   Towel Bars Baskets Something to attach baskets to bar - I used craft ribbon Spackling (if needed) Sand paper (if needed) Self-adhesive drywall joint tape (if needed) Primer and P

Fallin' For Tulle Wreaths

Pinterest is at it again.  While browsing Pinterest during my daily hourly look through, I found this pretty fall wreath : Since it is on Etsy, I started to look for an online tutorial on how to make a tulle wreath.  I've never seen one before, so I wasn't sure where to start.  Google makes searching for things so easy and I quickly found this  tutorial.  It was very helpful. I got most of my materials at a store called WOW Outlets in Pennsylvania while visiting my family (yes, another trip to PA).  The foam ring is 11" .  I originally started with a 12" ring, but felt it was too big.  I had almost the whole wreath covered with tulle, didn't like it, and took it apart for the smaller ring. I got some of the tulle at the same store, some at the $1.00 section in JoAnn's, and had some cut from a bolt at JoAnn's.  I also purchased some gold ribbon as well. The flower, leaves, and scarecrow are all from fall decorations I had lying around the ho

Spring Hanging Towels

I just wanted to share what I started over Easter break and finished yesterday in between church, hunting for Easter baskets, and eating tons of food.  My Gram's birthday and my godmother's birthday is in April, so I told them I'd make an Easter hanging towel for them.  I had four towels, so I was able to make 8 all together.  Only five are shown: Since I last made the shamrock one, I did find out that I can make a buttonhole with my sewing machine.  However, I can't find the manual so I still don't know how to use it.  So I'm still sewing snaps on the towels like I did  here .  I did figure out that I can sew the button on at the same time as the snap, so that made it MUCH easier than the first time I did it.  I actually like the snaps and will probably keep with it even if when I do figure out how to use it. I gave all of them away as gifts, except for one.  I think they turned out just springy :) I hope that you all had a blessed Easter !